Which heated towel rails are more reliable. Hot water towel warmer which is better to choose important points. Copper and brass towel rails
Which heated towel rail to choose: water or electric?
Typically, heated towel rails are placed in a new apartment or house, less often, Soviet models that have expired are changed. Design, form - not the most fundamental moment. It is important that it is practical and does not take much time.
There are two main types of heated towel rails - and. From the name it’s clear that the differences lie in the heat source. Each of them has its pros and cons.
Water towel warmers are heated by hot water passing inside the device. They are connected to the hot water supply system of the apartment or the central heating system. In a private house - to an autonomous heating system or hot water supply.
Benefits:
- more reasonable price in comparison with electric heated towel rails;
- no additional electricity costs.
Disadvantages:
- can only be installed in a specific place in the bathroom (next to the piping);
- does not work during periods of shutdown of heating and hot water.
You can’t throw a heated towel rail on any wall of the bathroom. If it is installed far from the riser, the pipe routing will be too complicated. Plus, there is a risk that due to the high resistance, water will not get into it.
Electric heated towel rails work due to a heating cable, a tubular electric heater or a special liquid inside. This is essentially an ordinary electrical appliance that connects to and is equipped with a switch.
Benefits:
- no connection problems, can be installed anywhere;
- can be used during periods of shutdown of hot water or heating.
Disadvantages:
- the cost is usually higher than that of water heated towel rails;
- additional energy costs.
If you decide to choose an electric heated towel rail for the bathroom, you need to know two things. It is believed that the cable version (without heating elements) is more reliable. But cable towel dryers, as a rule, are small in size and do not allow regulating the temperature properly.
For those who want to use a heated towel rail during periods of shutdown of hot water / heating, and the rest of the time - do not consume additional electricity, there are combined heated towel rails. They work both from heating or a water supply system, and from the mains.
What material is more reliable?
Both water and electric heated towel rails are made of various materials. Stainless steel towel rails are one of the most reliable, since this material is resistant to corrosion and aggressive environmental influences. Stainless steel towel rails withstand pressure when connected to a central hot water system. They are affordable and durable, but quite heavy in weight.
Brass heated towel rails are also a good choice (brass is rust-resistant and highly durable), but is not designed for pressure in an ordinary city apartment. This device is best suited for an autonomous system. A wide selection of shapes and designs is one of the advantages of brass towel rails.
Copper heated towel rails are characterized by good heat conductivity and corrosion resistance. They are lightweight, easy to assemble and look original. More suitable for an autonomous water supply system. Copper towel rails can be connected to the central system if the pipes are protected against contact with water by galvanization.
An economical option is heated towel rails made of black steel. It should be borne in mind that if they do not have an anti-corrosion coating, then they are suitable only for an autonomous heating system.
Do not trust the description of the model, which says that the heated towel rail sets a certain microclimate in the bathroom. This is not its main function. The microclimate in the bathroom is a warm floor, a proper ventilation system and autonomous heating of water.
- For an ordinary city apartment, a water heated towel rail is quite suitable. Electric heated towel rails are good if it is not possible to install the device close to the wiring of pipes or other technical difficulties arise.
- When choosing the material from which the heated towel rail is made, you should pay attention to which water supply system (autonomous or central) the heated towel rail is connected to. In the central system, pipes are subjected to pressure drops and aggressive water, respectively, the material should be more durable.
- Be sure to pay attention to the possibility of connecting to a hot water supply system, pipe wall thickness, thread condition, power, in order to avoid unpleasant consequences and additional costs in the future
The heated towel rail for the bathroom today has ceased to be a fixture with conditional functionality. Previously, this feature was explained by the simplicity of the design, which was presented as the only solution in the post-Soviet space. The described unit was in the form of a steel pipe, which bent in the shape of the letter G.
The presence of such a device in apartments, which concerns even the times of the construction of Khrushchev and prefabricated houses, was not a whim. Water towel dryers (which is better, the reviews below will help determine) are a compensation loop of temperature differences. What is true for risers of impressive length with a horizontal arrangement. A similar system is found in every multi-storey building.
Varieties of heated towel rails by material
The most budgetary today are heated towel rails, which are made of steel. Do not assume that such structures are similar in quality and coating technology for protection. According to standards, all joints in such devices must be rolled and must not have sharp edges.
Considering inexpensive models, you can understand that they are usually applied pentaphthalic paint, which is not able to guarantee one hundred percent protection against corrosion. Manufacturers, trembling with their reputation, use the technology of polymerization of steel heated towel rails. But the best option would be models that are coated on both sides with a polymerized composition.
If you are interested in water heated towel rails, which ones are better, reviews can help you decide. The most durable are stainless steel devices. They have a high cost, but today there are also brass products with chrome plating, which are somewhat cheaper, because brass is ductile, which greatly simplifies the production process and reduces cost.
Features of Brass Water Towel Warmers
Experts recommend choosing a heated towel rail based on the material that underlies the heating pipe. In stores you can find products made of black steel or non-ferrous metal. Recent solutions include copper or brass. It is important to remember the anti-corrosion coating.
As practice shows, brass products are ready to last about 10 years. However, during this time, substances falling into a solid precipitate will dissolve in the liquid, this will negatively affect the diameter of the pipe, which will gradually decrease. Brass units are also subject to abrasive wear, this is true for walls and bends. Particles will thin the material over time. Therefore, brass aggregates are used quite rarely.
Which heated towel rails are better: choice by technical characteristics and company
Quite often, owners of apartments and houses think about which heated towel rail to prefer, as well as what design it should have, so as not to be difficult to install and maintain. Different manufacturers try to solve these issues in different ways.
For example, Russian suppliers most often produce models in the form of letters M and P, but recently you can find ladders that are more advanced, which is why they have gained popularity. Considering the color scheme, you can find not only common chrome and gloss, but also unusual solutions, matte coatings, as well as all kinds of patterns on the surface of heated towel rails.
By order, you can even purchase designs that have a unique color. True, you will have to pay a little more for such a decision. In favor of domestic-made heated towel rails, we can say that they cost less than the others, in addition, they are adapted to the coolant pressure in Russian systems. The test pressure is equivalent to 22.5 atm, while the working pressure is 15 atm, which indicates a good margin of safety.
If you prefer water heated towel rails, which ones are better, reviews will help you understand faster. For example, Finnish designs are known for their high quality as well as certain features. So, the standard distance between the axles is 200 mm, which is true for U-shaped forms, this parameter increases to 630 mm and up to 310 mm, if we are talking about M- and S-shaped structures. These dimensions should be taken into account by the master in order to avoid misunderstandings during installation, which are rather difficult to eliminate. Among other features, it is necessary to highlight that Finnish heated towel rails must be connected to the heating system using a rigid method.
German product reviews
If you want to make the bathroom more technological and comfortable, then you should listen to consumer reviews, they argue that German designs and those imported from other European countries often have a swivel mechanism.
With it, the unit can be deployed 180 °. Consumers consider this option very convenient, however, when choosing, you should consider whether the area of \u200b\u200bthe room will allow you to unfold the structure without obstacles. Such systems, according to customers, are inferior to stationary in the ability to withstand an impressive weight. The rotary heated towel rail should not be loaded more than 5 kg.
Varieties of electric heated towel rails for the internal filler
If you are faced with the question of which electric heated towel rail is better, then you should deal with the internal filling. On sale you can find “dry” and “wet” options. In the latter case, heating occurs, as in a conventional heater.
And if you liked the “wet” electric heated towel rail. Which is better? A review of the models will first make it clear that such models have a housing filled with liquid that is heated by heating elements. Typically, such devices are filled with oil or antifreeze. But if you have a “dry” model in front of you, then a heating cable is used instead of the liquid, which resembles the one that is placed in the “warm floor” system. Based on this, make your choice.
Which electrical appliance is better - “dry” or “wet”?
When we choose the best electric heated towel rail, we make a comparison. Two devices can be taken as the basis of this analysis, one of them will work on a dry basis, while the other on a wet basis. Dry electric heated towel rails are cheaper; they do not imply increased tightness, as is the case with liquids. On the issue of installation, “dry” electric heated towel rails also benefit, since they do not have a heater, which should be located below. This indicates that the “dry” models can be hung, orienting them in different ways.
As for the "wet" models, they should be located only vertically. If you still have not decided which electric towel rail to choose, then you should also pay attention to power. Liquid models are stronger in this matter. But the “dry” option will consume no more energy than a 100 W bulb, while the heating level will be lower.
The heated towel rail is an indispensable attribute of the bathroom. It is almost impossible to do without it. With its help it is convenient to dry small linen, to heat the room in the absence of heating radiators. How to choose a heated towel rail for bathtubs: water or electric stands in front of many. A universal answer to this question is quite problematic. It is necessary to take into account the individual characteristics of the bathroom, the area of \u200b\u200bthe room and determine the type of equipment.
Almost any bathroom is initially equipped with a water heated towel rail. However, year-round operation is not always possible. For example, in Khrushchev’s and in houses with a column, this component of communications is separated from the water supply system. The pipes only heat up when the heating season begins.
Somewhat easier for those whose apartment is equipped with centralized water supply. In this case, part of the hot water pipe is involved. However, the temperature of the work surface completely depends on the quality of utilities. When you stop supplying water, you will have to face the fact that the coil cools down, and its proper use for some time will be impossible. In addition, it will not be possible to control and regulate the temperature regime. However, it will not be superfluous to know how to choose the right water heated towel rail for the bathroom.
In the form of a ladder, both electric and water models are produced
More convenient in daily use are electrical appliances. They have a number of advantages compared to peers that are part of hot water:
- the possibility of year-round use;
- some models are equipped with a thermostat, which allows you to control the intensity of heat production;
- free placement in the room, excluding directly the bathroom area and the space around the water sources;
- various sizes and configuration of equipment.
However, with all the advantages, disputes about which heated towel rails are better - water or electric - arise quite often. It is not always possible to find a place even for a small additional coil, someone is stopped by the cost of electricity or the lack of an extra outlet.
When choosing a water heated towel rail, the operating pressure of the equipment is taken into account. For safe operation, it is desirable that this indicator reaches 6 atmospheres.
The heated towel rail with a swivel mechanism is very easy to use
How to choose a heated towel rail in the bathroom
An important characteristic of the equipment intended for drying towels, small linen and heating the bathroom is its shape. Manufacturers offer the following product configurations:
- ladder;
- U-shaped;
- M-shaped;
- PM-shaped;
- Sub-shaped;
- S-shaped;
- multi-crank coils.
Types of heated towel rails
The letter designations give an idea of \u200b\u200bthe layout of the dryer pipes. The most elementary are P- and M-shaped models. They are easy to install, as a rule, they are easily integrated into the design communications system. However, it is worth noting that the U-shaped products are functionally limited and are designed to accommodate one device.
PM- and PL-shaped models are somewhat more effective - you can hang two or three towels or several units of small linen on them. The heat transfer of such equipment is also higher, which is important in the cold season, provided that there are no radiators in the bathroom.
U-shaped models are the simplest of all available on the market.
How to choose electric heated towel rails? The choice of the electric model should be made based on the configuration and heat transfer of the device (the most effective - from 600 W to 2 kW). The most popular models are ladders. They have a number of significant advantages:
- wide assortment range;
- ease of installation;
- functionality;
- aesthetic appearance;
- the possibility of thermoregulation (if an appropriate sensor is provided).
Manufacturers also offer variations on the theme of ladders - interwoven models, products with crossbeams of various lengths, symmetrical or asymmetric. Dryers look elegant in shape resembling a sine wave.
A number of manufacturers offer combined heated towel rails - they can be heated both from water and from electricity.
Water heated towel rails are placed next to the washbasin or bathtub, as they are directly connected to the water supply system
What to consider when choosing a heated towel rail
Which heated towel rail is better to choose is a common question, which is not surprising. Manufacturers form an impressive assortment range, from simple models to original designer products. Therefore, it is important to formulate the "conditions of the problem":
- determine the type of heated towel rail - water or electric;
- the location of the equipment - the water supply completely depends on the water supply, the electric can be placed in any convenient place - above the toilet, a washing machine, near a mirror, on a loose wall, etc., however, an outlet is needed for it;
- model size - depends on the availability of free space on the wall;
- type of coating - painted (usually white), or chrome-plated stainless steel.
Often, a topical issue is raised on thematic forums on the Internet. Most users are inclined towards electrical equipment, but modern water models also find their adherents. In addition, it is not always possible to install a "stand-alone" dryer. In some bathrooms, even for a small staircase or the letter P there is no place.
Ladder - the optimal type of heated towel rail
In a small bathroom, a heated towel rail is often placed above the toilet or washing machine. The latter option is convenient because one outlet is enough for two electrical appliances. The only negative is that they cannot be turned on at the same time.
Placing a heated towel rail above the toilet saves space
Having decided to purchase a new heated towel rail, they also assess the possibility of expanding or reducing the space occupied by the “default” coil. Often, the installation of a new dryer requires significant changes in the communications system.
And finally, the type of coating. They are based on financial opportunities and design solutions in the bathroom. If there are no chrome details in the room, and a light ladder harmoniously fits into the interior, it is advisable to prefer a white model.
White heated towel rail
In the presence of metallized decor elements, professionals recommend staying on chrome equipment. By the way, such heated towel rails retain a presentable look longer.
Best of all, when deciding which heated towel rail to choose for the bathroom, consult a professional. Specialists in the equipment of bathrooms thoroughly know the lineup, market conditions, technical features of products from different manufacturers. In addition, the craftsmen competently and skillfully carry out installation of a heated towel rail - this is one of the conditions for effective and long-term operation of the equipment.
Choosing a heated towel rail for bathtubs: video
Towel dryer is a device designed to dry wet towels and reduce humidity in the room, in addition it heats the bathroom. This device cannot be called heating, because hot water runs through it, and not the coolant of the heating system, in city apartments it works regardless of the season - year-round. In winter, it performs the function of additional heating. Towel dryers are installed in addition to the main heating to dry things in small rooms or corridors.
Water is used as a heat carrier in a water towel dryer, and its operation may depend on many reasons. Devices can be divided according to the type of connection to the system - upper, lower, lateral, according to the flow rate of the coolant, power and material of manufacture.
Structurally, a water heated towel rail is similar to a heating battery, which is a pipes of different or identical diameterswelded into a multi-channel heat exchanger. A properly installed water heated towel rail in the future does not need constant monitoring, the technical parameters of the device correspond to the characteristics of heating radiators. He becomes full efficient heaterwithout adding economical costs to the central heating system.
In appearance water heated towel rails are:
- Standardhaving the form of a bent pipe, in the shape resembling the letters "P" or "M" with a small heat transfer of about 0.5 kW.
- Modernizedhaving shelves (advanced ordinary heated towel rails).
- Elegant, representing devices of original forms such as ladders, foxtrot and others.
Water towel warmers can be made:
- Stainless steel. For domestic conditions - this is the best choice. The outer part of such devices can be chrome plated, painted, polished.
- From non-ferrous metals. Such devices have a short service life due to the exposure to water aggressiveness at high temperatures in the heating and hot water circuits and the presence of harmful impurities that destroy the pipes.
What to look for when choosing
Before you buy a water heated towel rail for replacement in a riser, you need to ask your home office about the pressure in the water system, and select a device to match this parameter.
When buying a heated towel rail, in addition to appearance, you need to pay attention to the following issues:
Keeping this little instruction in mind, you can safely go to the store and choose a heated towel rail that you like.
Video instruction for choosing a heated towel rail
Overview of the most popular brands - models
Today, the market has a large selection of water heated towel rails of various types. It is very difficult to immediately determine among the devices available for sale, when all of them are suitable for you according to technical parameters.
St. Petersburg company Sunergea produces water heated towel rails from simple models to design developments. The products of this company are distinguished by reliability, durability, made of stainless steel. The technical parameters of the devices fully comply with SNiP. Pipes are purchased abroad and in the production process at each technological stage checked for integrity from exposure high pressure. The devices are fully adapted to the central heating system and can withstand temperatures of 105˚C, designed for pressure from 3 to 25 atm. They can be installed not only in the bathroom, but also in the corridor, kitchen and other small rooms.
To give the appearance of a mirror surface, finished products are polished in several steps. Towel dryers can also be sprayed in various shades using a special spraying technology to give them an even more elegant look.
The simplest types of products are P-shaped heated towel rails, with a power of 0.5 kW and a price of 1800 r.
One of the most popular appliances is water heated towel rail "Elegy"representing a gracefully curved coil. All elements are located in different planes, and this makes it possible to more efficiently dry household items. The heat transfer of such devices is from 230 to 621 watts, and the size range begins 60 * 40 cm and ends with 120 * 60 cm. Prices, respectively, from 7500 r. up to 13 500 r.
Series "Galant"these appliances are also popular. Its traditional appearance, the location of jumpers, practicality do not leave the buyer indifferent. The company produces 14 types of this model, differing in size. They can be selected for a room of any size, the size of the devices is from 50 * 40 cm to 120 * 60 cm, corresponding to heat transfer from 183 watts to 568 watts. The price is also attractive - 6,800 p. to a smaller size and 13,700 p. - for more.
The basis of the series "Bohemia" - the elegance and functionality of jumpers. The device is available in 16 sizes and can be supplemented with a shelf. It is made of food-grade stainless steel and can withstand pressure from 3 to 25 atm and a coolant temperature of up to 105 ° C. The minimum size is 50 * 30 cm, and the maximum is 120 * 60 cm, power is respectively from 197 to 834 watts. The price of this series starts at 8,200 p. to a small size and ends with 17 900 p. at the largest.
The Furor series looks unusual, having a size range from 60 * 60 cm to 100 * 90 cm, at a price, respectively, from 9,100 rubles. up to 13 000 r.
Production Russian company "Nika", one of the leading manufacturers of stainless steel heated towel rails, places high demands on its products. Each device is tested for strength with a water pressure of 40 atm, application plasma polishingmakes appliances dazzlingly shiny, adding a sense of comfort and cleanliness. The assortment of the company includes 1400 standard sizes, 53 models. It can be devices with shelves, hangers, type "P" and "M" - figurative, as well as a mixed look.
Budgetary coils "Nika" can be with bottom, top and side connection. The most inexpensive P 1 32/80 costs 1600 rubles, made in the form of the letter "P".
Coils of type M 1 60 * 40 and other sizes are from 1650 p. They are made of stainless steel and are designed for small bathrooms, have a classic M-shape. These devices are designed for working pressure 3−25 atm, heat transfer 125 W, lateral connection, warranty period 5 years.
The improved mixed model PM 1 60/40 already has a large heat transfer of 232 W, with a wall thickness of 2–3.5 mm and plasma polishing, costing 2,690 r.
In the middle price segment there are variants of ladders with arched jumpers such as L. D. Cost of these devices starts from 6,000 p., heat transfer 260 W, heated area of \u200b\u200b3 square meters. m, test pressure 40 atm. A ladder-bend of the same heat transfer type L Z, the price of which is from 4,960 rubles, will cost a little cheaper to the buyer. and a ladder L90, worth 5 120 p. with the same technical parameters.
Towel rails of new design developments are more expensive, for example, Nick L. B. 1 60 / 50−7, represented by three running sizes, costing from 9,000 rubles, and heat transfer of 400 watts.
Another Russian company produces heated towel rails of modern design - this aquaStal company.The company has long been using new equipment for the most advanced technologies. The material for the manufacture of heated towel rails is imported imported stainless steel, which is highly resistant to corrosion processes. Strength test produce 2 times under a pressure of 25-50 atm.
Water-economy towel rails of economy class Margroid, view 35 of the simplest view are from 800 p. (32 * 40 cm), with increasing size, the cost increases (50 * 80 cm - 1250 p.). Heated towel rails of the middle price category Margroid, type 24 are from 1650 p. (32 * 40 cm) and above.
Heated towel rails of the so-called premium class cost more than 3500 r. and have an original look, such as Margroid 11 A, with an initial price of 7,340 r. (60 * 60 cm). On the market there are devices manufactured not only by representatives of these companies, but also by many others. And basically it’s quality productssuitable for our conditions of thermal systems. You just have to decide on the necessary heat dissipation for your room and the appearance that is acceptable to you.
2016-06-03 13:57:38
For many years now I have been faced with the problem of wet towels, as drying in the street does not always work. I wanted to know where to connect the heated towel rail to which supply source? Can it still work when cold water is turned on?
The right choice of a heated towel rail for the bathroom is very important. After all, the convenience of using the room where a person takes water procedures depends to a large extent on this device.
1
The device we are interested in is used to dry wet items after washing, bathing and washing. In addition, it is necessary to maintain comfortable conditions in the bathroom. If the described device is installed in it, you will never freeze when you leave the water after swimming.
Device for drying wet items
Currently, you can choose one of three types of towel warmers:
- Water. Such a device is a pipe bent into a coil. Water (hot) circulates through it. Similar designs are initially mounted in the bathrooms of apartments in high-rise buildings. A heated towel rail is usually connected to the heating system of the home. This means that it operates exclusively during the heating season. The rest of the time it is not used. Naturally, its operation is impossible when carrying out any emergency operations affecting the heating system of a high-rise building.
- Electric. A more modern device that can be used at any time of the year. The main thing is that there is electricity in your home. Installation of such products can be carried out not only in the bathroom, but also in the kitchen. But, as you yourself understand, electricity bills during their operation will be slightly larger than usual.
- Combined. It is a kind of hybrid of electric and water products. The combined heated towel rail operates in two modes. It is very comfortable. When the house is not heated, you need to choose the electric mode of the appliance, and with the onset of the heating season switch to a more economical water.
Note that devices of the third type are not particularly popular with domestic consumers. This fact is connected with their rather high cost. Many believe that it is better to choose a cheaper and fully functional electric or water heated towel rail. We’ll talk about them in more detail.
2
When you decide which type of appliance is most suitable for your bathroom, you should deal with the materials that modern drying for wet laundry is made of. Such knowledge will help you choose the right heated towel rail.
The cheapest fixtures are made of ordinary steel. Experts do not recommend mounting them in the bathroom, since they are mostly short-lived. This is primarily due to the low quality of the water flowing through the pipes. Steel devices are of the following types:
- painted;
- polished;
- chrome plated.
Chrome heated towel rail
Dryers with a chrome surface are considered the most expensive, but also the most durable. Polished designs have a presentable appearance, they serve a relatively long time. But the painted heated towel rail almost immediately after the start of operation in the bathroom loses its original appearance. This does not apply to foreign steel products that are produced with the obligatory polymerization of metal from the outside and from the inside of the structure. Such devices can be used for decades.
Structures for drying things made of stainless steels are characterized by maximum durability.
If you plan to install a heated towel rail for years, it is worth choosing such a product. And lovers of special aesthetics and originality in the interior of the bathroom can be advised to take a closer look at the brass and copper structures. They look great, have a high heat transfer rate. The disadvantage of such products is their relatively low durability (when compared with stainless steel devices).
3
An electric heated towel rail is a reliable autonomous system that will work regardless of the presence of hot water in the heating system of the home. In such constructions there are no problems with water pressure, air plugs do not appear in them.
Electrical structures are “dry” and “wet”. In the case of the first, a special heating cable is mounted (approximately the same as the one that is placed in the now popular floor heating). But the contour of “wet” products is filled with oil or antifreeze and heated with TENom, which is located below the structure. How to choose a heated towel rail - "wet" or "dry"? Decide for yourself. In doing so, pay attention to such factors:
- Devices with a heating cable heat up very quickly, but also cool quickly. And “wet” constructions after shutdown remain hot for a long time.
- Products with oil are more expensive than their cable counterparts (the process of their production is more time-consuming due to the need to ensure absolute tightness of the housing in which the liquid circulates).
- Systems that allow you to select the drying temperature are most often mounted in devices with heating elements. “Dry” designs usually work according to a simpler “plug and forget” standard.
- In terms of power, an electric heated towel rail with a cable is weaker than an oil heated one. You need to choose a "wet" unit, if you plan to use the bathroom to heat it. If the design is required exclusively for drying wet things, it is better to purchase a less powerful (and more economical in terms of electricity consumption) “dry” device.
Towel dryer with cable
Before you finally choose an electric heated towel rail, consider the following. Oil devices require professional installation. And cable constructions can be installed without any problems by any home master. Such an electrical unit is placed in any position; there are no special requirements for its installation.
In fact, you can already easily determine which electric heated towel rail will suit you in all respects. But do not rush. We have prepared for you some more important recommendations from the pros. They are given below:
- The heat transfer of the structure is higher, the more there are horizontal tubes on it.
- For a small bathroom, it is better to buy sliding products. They have side “ears” that fold to the center when the unit is not in use. Due to this, the design takes up a minimum of space when folded, and a lot of things can be dried in the open on it.
- Convex tubes hold laundry much better during drying than straight tubes.
We add that electric dryers are available in floor and wall versions. Those that are placed on the floor are more mobile. If necessary, they can be transferred to another place (for example, to the kitchen) or taken to the cottage when a long vacation is planned out of town. Wall-mounted products are installed permanently using special fittings (in this case, you need to make holes in the walls for fixing it).
4
The water unit for drying clothes in the bathroom, as noted above, is made of different materials. But this is far from the biggest problem of choosing such a device. The bottom line is that specifications water devices are required to fully meet the indicators of pressure and working pressure, which is present in the hot water supply system of an apartment building.
In accordance with domestic Gosstandarts and sanitary standards, any sanitary-technical water intake equipment in high-rise buildings must withstand pressure up to 7.5 atmospheres. In practice, water intake systems in high-rise buildings operate at average loads of no more than 4-6 atmospheres. But with water hammer this value can increase. In this regard, be sure to see the passport of your favorite heated towel rail. And clearly recognize in it the maximum pressure at which the device is able to function.
Passport for heated towel rail
You should always adhere to this advice when you buy products of foreign (in particular, European) manufacturers for high-rise buildings, and do not pay attention to it at all if you purchase a device for installation in a private house. In it, the pressure in the heating and water systems, as a rule, does not exceed several atmospheres. For a private home, any model of dryer is suitable.
Structurally, water heated towel rails of foreign manufacturers are different. They are made with side shelves, various ladders, in the form of letters P, M and so on. Which specific device to choose is up to you. The main thing is that it fits in the bathroom and does not clutter it. To do this, it is enough to correctly measure the size of your bathroom.
Installation of water structures, if desired, is done by yourself. carried out near the heating riser, connected to the pipe by means of elbows, couplings or a stopcock. All connections made must be sealed. The easiest way to do this operation is with Teflon tape. And don't forget to disconnect hot water before starting installation work. Let your bathroom always be warm and dry!
